Yes,
I'm up to my old Shenanigans again! Thought I might make a steemit Logo Stamp to help promote steemit and........ because who does not like stamping things.

There is alot of things one might want to stamp! So today let's have some fun and see how positive we can make this!

First off I mustered up some materials. In the photo above you can see I cut the steemit logo out of a piece of paper and taped it to a piece of cork board. I used my scribe to trace a slightly larger outline of the shape.

Next up I got my jigsaw out and prepared to cut the shape that I trace with my scribe!

I put a fine laminate blade in the jigsaw and clamp the piece of cork board to my workbench.

Here's how the piece looks after I cut it out! Then I pulled out my hundred and 20 grit sanding block to take down the rough edges.

Kind of looks like a trump head from the back side at this angle! I'll give this a coat of paint in a later step!

Next Step was to trace the steemit logo on the cork side of the board.

I trace the outline with a black pen as you see here!

Next with a sharp knife I cut down through the layer of cork along the outline of the steemit logo. I also cut slits along a diagonal pattern. And then remove the I need a material with a chisel.

Slowly but surely all the material is removed!

The step is self-explanatory!

Next I painted the top of the stamp silver. Here's a photo after the first coat!

After the silver paint dried I painted the outline of the bottom of the stamp steem blue!

Here is what the paper outline I made looks like after the blue!

That's all for part 1. Stop by for part 2 where we complete the stamp and start stamping some s*! Neighbor's car and Facebook users beware!!

@dylanhobalart
January 06/2017