I have also tested ABS printing using the Polyken 296FR tape that I was recently testing with PLA filament as a surface for the build plate of a 3D printer. The results with the use of ABS filament were as good as what the PLA test showed - good adhesion and easy removal of the 3D printed part.
Using regular ABS filament with 230 degrees Celsius for the extruder and 110 C for the heated build plate covered with the Polyken tape did provide really good results.
People that have used ABS filament know that it is much more prone to warping at the edges due to the material shrinking more when cooling down, so the use of a heated build plate is one way to try to avoid possible issues, but the surface of the build plate is also important.
The Polyken 296FR tape does provide good adhesion and easy removal and with the help of the heated build plate there is no warping or even if there is it is really minimal and a subject to some slight adjustments.
The end result is good adhesion, easy removal and no warping of the edges thus no deformed or failed prints when using ABS filament as well as with PLA as I have previously reported. It seems that this unexpected contender for a tape that was not originally intended to be used for 3D printing purposes may actually turn out to be an interesting and surprisingly well working solution. I still need to do some testing with some more exotic filaments, but so far the results are pretty promising...
If you have a question or want to add something, then please leave a comment below.
Did you like what you have just read? Check my other posts on steemit @cryptos
If you like what I'm doing for Steem and on Steemit you can support me as a Witness
So cool looks like a kitty upvoted back thanks
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
It is a cat-shaped holder for smartphone :)
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit