If your razor pocket mod battery is not working, there could be several reasons, and here are some troubleshooting steps and solutions:
1.Check the Connection: Ensure that the cartridge is screwed on tightly but not overtightened, as this can restrict airflow or damage the connection point. This is a common issue that can cause the battery to blink white three times.
2.Clean the Connection Points: If there's debris or oil on the exterior surface of your cartridge or vape battery, clean the connection port with alcohol and a cotton swab. Allow it to dry before attempting to use it again. This can help resolve issues where the battery can't read the atomizer.
3.Adjust the Connection Plate: If the connection plate on the battery or cartridge is not making proper contact, you can gently lift it using a paperclip. Be careful not to pull too hard to avoid damaging the interior wiring. This adjustment can help the battery make better contact and function efficiently again.
4.Inspect for Damage: Look for any visible signs of damage on the battery or cartridge. If you find any, it may be time to replace the damaged component.
5.Check the Charger Connection: Ensure that the charger connection is clean and secure. If the battery isn't charging, it won't work, and the lights may not illuminate when you try to activate it or turn it on.
6.Avoid Rapid Chargers: Do not use a rapid charger for your vape battery, as it may cause the battery to overheat or fail.
7.Battery Installation: If you are installing a new battery, follow the correct steps as outlined in the installation instructions. For example, lift the Pocket Mod seat, remove the screws, and carefully disconnect the white plastic connectors attached to the batteries and control module.
8.Upgrade the Battery: If you find that the battery life is not sufficient, consider upgrading to a higher capacity battery. There are options available that can extend the run time of your Razor Pocket Mod scooter. For instance, the Extended Range Upgrade to High Performance Rechargeable 9ah can provide 28% longer run time .
9.Safety Precautions: Always turn the power switch off and disconnect the charger before removing or installing the batteries to avoid potential shock or other injuries .
By following these steps, you can identify and resolve the issue with your razor pocket mod battery and ensure a safe and enjoyable vaping experience.