Here are some steps in using theodolit which will make us use theodolit easily, such as:
1. In using theodolite, the first step we must do is turn the antilock screw counter locker counter clockwise to create the slurry of the coupler.
2. After that we have to pull the extension down to our chest to make it easier for us to use theodolite.
3. If we have found a fitting position to use theodolite, do not forget to tighten the extension screw.
4. For when we will use theodolit not easily wobbly, then we must create a stative buffer foot with an equilateral triangle shape.
5. Then we step on the foot pedal in theodolite to make theodolit stronger.
6. Re-adjust the tribal position of theodolite plate to make it more suitable and comfortable to use.
7. Put theodolite above the tribal plate, then we tighten the centering screw that is on the theodolite. 8. The next step we have to do is set the nivo level of the box so that the first axis is correct in the upright state by moving the three-sided screw on the side of theodolit regularly.
9. Set the tube nivo to make sure the second axis is properly aligned by moving the scooter on each side of the theodolite regularly.
10.Rearrange theodolite position by moving it to the right and left to put theodolite fitting in the center of the BM point.
11. Check again the position of the viewfinder. Check index at circle scale. To read theodolite results note the measuring hair that will reveal the letter E.