Hello steemian how is this happy morning news survived activity and compassionate greeting. I told you a bit about hand skill that is: about how to make a cooking table to put the stove. I worked this table myself some time ago, with basic materials of wood and plywood and makeshift equipment.
Creating a table or to produce one cook requires special skills and takes patience, as this is a soft job not a grunt work.
Before working on a table of course we have determined the size of the table length times, as well as the necessary materials and tools to be used.
The materials needed are:
wood size 2x2
wood size 1x3
wood size 1x2
12 pcs size sheet one sheet
spikes 1 "
nails 1 1/2 "
nails 2 "
sand paper
door hinges and door handles
Tools needed
one saw
one piece of measuring instrument
one hammer
elbows
chisel 1 "and 1/2"
screwdrivers
and one ancient tool for cleaning wood (nyeh wood)
Here's how to do it:
Wood size 2x2 in measure and cut as desired and how many poles to be cut, then sculpted according to the hole is needed. Wood size 1x3 in measuring and cut to the length of a table as you wish, the ends of both sides are reduced to be scrubbed into a carved hole. Wood size 1x2 in measuring and cut according to the width and breadth of the table.
After the whole pole is carved and the wood for the length and width of the table diptong then ready for the pairs.
Now stage to install the table frames, do not forget to give the nail so that the frame of the table sturdy and strong.
After the skeleton is ready then step pemasanga base of plywood, and install door and drawer table.
dull-giving stage where there is a hole of former nails and sculptures as well as cut pieces of saws.
smoothing stage with sand paper
the last stage of painting and plitur as desired.
So my story is about how to make a cooking table that I can share, good luck.