A swimming pool is, without a doubt, a good investment for your house. Swimming pools have become more like a necessity than a luxury nowadays. You can add one or renovate the old pool for an instant increase in the market value of your home. It is also an excellent method to make your house stand out from the rest of the houses in your area. Here is a step by step guide to help you with your pool renovations.
What to expect?
Having a pool increases the value of your house in the market. It is not easy to achieve this value without some investment. Having a pool and maintaining it has its pros and cons. Pool renovations also are a good idea to increase the selling price of your house if you have an old pool. You can increase the market appeal of the home by this, as suggested by experts in pool renovations in Perth Australia. At the beginning of the restoration, it is essential to talk to the builders. Mostly about the expectations that you are going to meet by renovating this. An open talk about it gives a clear idea to the pool builder and gives you an honest estimate or price quote that can fit your budget. There are going to be time delays due to bad weather or other external factors, and this should also be included in the time calculation.
Draining of the pool
The very first step to the renovation is to drain it with a submersible pump. This step takes six to twelve hours and is directly related to how big your pool is. You can hear loud slurping noises once it is completely drained. Now, unplug the submersible pump. The next procedure is to chip out the pool. Your pool is chipped, and the primer is applied. This step takes half a day to finish. They will then clean the shell of the pool and remove debris from it by the end of the day.
Tiling
Contractors start by applying to grout and then tiles. You can choose your preferred flooring for a sleek and modern look to your pool. The tiling is a time-consuming process depending on the size of your pool. This process usually takes one or two days. After tiling, the plastering of your swimming pool steps is done. This procedure is done only on the last day of the tiling process.
Surface Application
After tiling, the rest of the surface of the pool is completed by plaster and pebbles. If you do not want tiles in your pool, then surface application alone can also be made in your pool. You can get trucks to deliver plaster and pebbles for pumping into your pool. The artisans of plaster take care of the rest of the application process with hand trowels. Doing this gives a smooth end product with a perfect finish. This process typically takes almost somewhere between four to six hours. If you are going for a pebble finish, then plaster coating is done with an acid wash. This coating takes a few hours to dry.
Refilling
After the surfacing gets over, refilling begins when everything is set and dry. The refilling should be done under the owner’s supervision. A skimmer opening is needed halfway up the line of the tile. Slow down the process for twelve to forty-eight hours, depending on the depth and size of your pool. You can add chemicals to the water once the pool gets full. The pH levels should need careful management to keep the pool permanently in the sparkling blue color.