You might recall from my post a few weeks back about how I was able to flatten out this curled and cracked walnut veneer.
But up close, it still looks pretty rough. Even though it is mostly glued down, there are a lot of cracks and bubbles.
Repairs start with careful application of glue underneath the bubbled areas.
For larger areas of less severe cracking, I use the combination of moist heat and and more glue to swell the grain and seal the cracks.
The moisture softens the old glue so I do not crack the veneer any worse than it already is.
I use a small brush to spread the glue around underneath.
Apply heat.
The veneer hammer is used like a squeegee to spread the glue evenly and push out the excess under the veneer.
Wipe up excess glue.
Finally, here is a before and after closeup of the repair. Look closely at the wood grain and you can see that it is the exact same spot.
You can follow along with the rest of the posts in this project at #leafyseadragon.
Join us at #woodworking for more great projects.
KInda like old instrument repairs. Most of the old guitars used hide glue so heat will soften it so it can be worked.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit